FESTO
1. Position transmitter SDAT and SMAT-8M
For reliable position detection
The universal transmitter solution: reliably and accurately records positions for standard strokes.
Position transmitter SDAT-MHS
The first analogue position transmitter designed as a proximity sensor
Position transmitter SMAT-8M
2. Optimally configurable : pressure sensor SPAU
Custom configuration with uniquely flexible connections.
Simple and quick to mount for every installation situation
Find out more about the pressure sensor SPAU
3. The first inductive proximity sensor for T-slots
Reliable positional feedback on electric drives?
Inductive sensors SIES-8M
4. High flow rate : flow sensor SFAM
Starting point at 1%
The basis for more energy efficiency - as an individual device or combined with the service units of the MS series
FESTO
1. SENCOMô SMART Digital Sensors
Yokogawaís SENCOM SMART Sensor Platform is an innovative analyzer platform that optimizes maintenance, reduces configuration time, and simplifies in-field maintenance and calibration.
2. pH and ORP Analyzers
pH and ORP meters, analyzers and transmitters are used for continuous process monitoring of pH and ORP to ensure water/product quality, monitor effluent discharge, batch neutralization, pulp stock, scrubbers, cooling towers, chemical, water/wastewater treatment and many other applications.
3. pH and ORP Sensors
pH electrodes and sensors are the sensing portions of a pH measurement. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper pH electrode/sensor selection is critical for optimal measurement results.
4. Conductivity Analyzers
Conductivity meters, analyzers and transmitters are used for continuous process measurement and monitoring of conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown and TDS.
5. Conductivity Sensors
Conductivity sensors and electrodes are used to measure process conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown and TDS. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper electrode/sensor selection is critical for optimal measurement results.
6. Dissolved Oxygen Analyzers
Dissolved Oxygen (DO) meters, analyzers and transmitters are used for continuous process measurement and monitoring of milligrams per liter (mg/l),parts per million (ppm), parts per billion (ppb), or % saturation.
7. Dissolved Oxygen Sensors
Dissolved Oxygen (DO) electrodes and sensors are the sensing portions of a DO measurement. There are three common technologies for dissolved oxygen measurements: polographic, galvanic and optical. Various installation options including floating ball, retractable, flow thru, immersion, and direct insertion.
8. Liquid Density Analyzer
The DM8 liquid density analyzer measures liquid density of general process liquids with high sensitivity and excellent stability. It has a measuring density range of 0 to 2.0 g/cm3, and unaffected by flow rate and viscosity. Besides general-purpose sensor, sanitary and explosionproof sensor are also available.
9. Fourier Transform Near-Infrared Analyzer (FTNIR)
An FTNIR allows for a real-time continuous measurement of multiple component concentrations in a variety of processes.
10. Wet Chemistry Analyzers
Yokogawa's wet chemistry analyzers are reliable and used for water analysis of sodium, silica, hydrazine and phosphate, so operators can minimize the increased risk of corrosion and associated component failure It can be reduced and mitigated.
Valve Manifolds
1. CO-BRAND VALVE MANIFOLDS AS SCHNEIDER
AS-Schneider Group with its headquarters in Germany is one of the world's leading manufacturers of instrumentation valve and manifolds.
AS-Schneider offers a large variety of valves and manifoldsas well as numerous accerrories needed for the instrumentation installations globally.
2. CO-BRAND VALVE MANIFOLDS WIKA
The German WIKA group is a worldwide leader in pressure and temperature measurement as well as for high quality valves and manifolds.
With manufacturing locations around the globe, WIKA ensures flexibility and the highest delivery performance.
Pneumatic Drives
1. Fluidic Muscle
High force combined with a small diameter
Frequency up to 150 Hz
Frictionless movement
Hermetically sealed
Dirt-resistant
2. Round cylinder DSNU with PPS cushioning
PPS for dynamic and gentle movement into the end position
Reliable due to self-adjustment
Economical due to reduced commissioning times
Reliable due to adaptation to changes and prolonged service life as shock absorber
PPS also available on stainless steel cylinder CRDSN
3. Standard cylinder DSBC to ISO 15552
Clever cushioning ñ saves adjustment time
With self-adjusting end-position cushioning PPS
Simple installation, no re-adjustment required, optimum cushioning
4. Standard cylinder with tie rods DSBG ISO 15552
Powerful large cylinder in many variants
With optional stud bolts for applications in the mining industry
Powerful, lightweight and durable
Cushioning P or PPV as standard
For use up to 150∞C
ATEX variants
For harsh operating conditions
5. Compact cylinder ADN-PPS to ISO 21287
With pneumatic end-position cushioning PPS
Need to adjust the cushioning? Fine tune it?
You can leave all that to PPS.
The end-position cushioning system PPS automatically adjusts itself to changes in load and speed.
High cycle rates possible
Ideal for OEMs: no risk of tampering
Up to 50% shorter than the standard cylinder ISO 15552 - with the same stroke
1: 1 interchangeable with ADN-P
6. Semi-rotary drive with piston DRRD
Greater stability even for smaller sizes
Positions precisely and thus more reliably even with a long lever arm
Cushioning options: internal and space-saving or externally for maximum torque in the end position
Optionally for size 16 and above: end-position locking and completely sealed variant
7. Semi-rotary vane drive DRVS
Rotation made easy - at a low price
Optional: innovative, simple sensing module
Simple, compact design
Lightweight
Swivel angle infinitely adjustable
Sealed for reliable use in harsh environments
8. Quarter turn actuator DFPD
Configurable quarter turn actuator with a simple and compact design
Single- or double-acting
Optimised spring cartridge design for more efficient single-acting operation in steps of 0.5 bar
End position can be adjusted at both ends for more flexibility during commissioning
Suitable for high and low temperatures: -50 ... +150∞C
Mounting plate for pilot valve in EU (G) and US versions (NPT)
9. Linear actuator DFPI
Easy to install ñ robust and reliable in operation
Now with mounting interface to ISO 15552
Optional integrated positioner or integrated displacement encoder
Mounting interface to ISO 15552 or DIN 3358
Double-acting
Suitable for swivel motions
Robust plug socket to protect the pneumatic and electrical connections
10. Electric stopper EFSD
The stopper for your transfer system
Easy to install
Can be connected directly
Can be actuated via 24 V inputs / outputs
Adjustable cushioning
Integrated sensor for position feedback
11. Linear drive DLGF
Space-saving mounting? Welcome the new champion!
Neat, tidy, structured ñ the linear drive is mounted without clutter. Direct connection of additional actuators without adapter plates, compressed air supply under the workbench, directly screwed in without support brackets: the DLGF is streamlined and slender.
12. Swivel Module DSM or DSM-B
Swivel module DSM-B: size 63
Sturdy and cost-effective swivel module for freely adjustable angles up to 270∞
The benefits to you:
Powerful: new chamber seal and new swivelling vane for outstanding synchronism from 1.5 to 10 bar
Cushioning with fixed stop for greater repetition accuracy and high mass moment of inertia
Cushioning option: flexible or hydraulic cushioning
Easy to service: precision-adjustable swivel angle, compatible with DSM-A series
Reliable: secure mounting with toothed cushioning mount
Economical: compact, low-cost sensing
13. Mini slide DGST
The precise and powerful unit
extremely compact slide drive
low-torsion and no misalignment
14. Stopper cylinders DFST
There are many reasons why stopping points are needed: for a fast flow of goods, when many channels feed into a main flow, or when the main flow branches out into different channels. This is when the stopper cylinder DFST comes into use.
PROCESS AUTOMATION
1. Control technology and remote I / O
Electronic controls and remote I / Os including electrical peripherals for standard and potentially explosive atmospheres.
2. Valve islands
valve modules with electric individual, multipole, fieldbus connection or integrated control, with or without electric outputs and inputs
3. Pilot valves
Solenoid valves for controlling pneumatic actuators with interface according to Namur (VDI / VDE 3845) as well as application-specific valves for typical safety applications in process automation.
4. Sensor boxes
Digital and analog limit switch boxes with optical indication for rotary actuators in standard and potentially explosive atmospheres.
5. Position controller
Electro-pneumatic positioner for control functions in combination with rotary actuators.
6. Drives
7. Process valves
8. Compressed air supply
Air supply combinations and individual units for compressed air supply in two series: MS and D series (in metal or polymer)
9. Pneumatic connection technology
Tubes
Snakes
Connectors
Links
Distributors
Hose jacket systems
Accessories.
10. Job-specific systems
Control systems for process automation
